What You Should Know About Making Duvet Covers
Are you thinking of making your own duvet cover? Well this article has been written just for you. Just take a note pad and a pen and read through this article right to the end.
The question on how to make duvet covers can be answered in a variety of ways. I will choose one of many alternatives that you can employ as soon as you are done reading. Let me say this before you get all worked up it is quite easy to create a duvet cover just as long as you follow all the laid our procedures. With this you don’t have to go aroud looking for discount duvet covers or branded ones line what size is the poterry barn full duvet size
Here is the first thing you need to do, choose the fabric you will be using. You will also have to take some measurements that is you will have to measure the length and the width. Knowing the best size that you will be using it on is important. For example, is it a queen, king, twin or single bed?
Now here is my advice. Make sure that you pick a washable fabric that could also double as a home decorator. light weight material is usually more appealing. Of course you need to take the weather and climatic conditions of your area into consideration.
Start by choosing two lengths of fabric spanning about 54 inches. It is always good to make it slightly wider. This will be used on the front of the duvet cover. Be sure that the panels are the same size as the measurements of the length as mentioned earlier.
- Find home decorator fabrics. make these about fifty four inches wider. Chances are your duvet is wider. if you do have a wider duvet you can just purchase another panel of material.
- The next thing to consider is prints and patterns. depending on the type of prints you will go for some adjustments may be necessary. For example, you may have to elongate your panels.
- The next step is to pre-wash and then iron the material.
- Now simply fold the front panel in half lengthwise.
- You may need to use an iron to make some sharp creases at the folds. Once you’ve done the ironing you may then unfold the fabric.
- Do this to the back panels as well.
- Draw a line that goes right down along the length of the panel where the crease is. You will need a fabric marking pen and a yard stick for this task.
- you need to make six panels by cutting out each line. i.e., 3 shall be on the back side and then 3 shall be used on the front part of the cover.
- Now the next step on how to make duvet covers is to simply take one panel and pin it, make sure it is that one that is narrow to one side of the front panel that is still uncut. pin it down so that all the edges of the material are tightly knit together & make sure that the sides are also lined up quite as well.
These tips provided above should be enough for you to create your own duvet cover. Yes there might be a few more steps to go but then it is all up to you how you want to wrap it all up and make one that will suite just your taste and style.
You can also check out